Written by Chris Smith · Illustrative case study
The situation
It was a single-item job on paper. A bloke at a property in Gold Coast had replaced his old gear and the delivery company wouldn't take the original away. The trouble was where it sat and what it weighed: broken dining chairs, damp-affected drawers and cabinets and collapsed sofas and armchairs were all in the mix once we got talking.
Why the customer needed help
Their main worry wasn't the cost. It was not knowing what could legally go where, and not wanting to damage the house getting it all out. Both of those are part of the job for us.
What was at the property
By my count there were broken dining chairs, damp-affected drawers and cabinets and collapsed sofas and armchairs, along with the usual loose odds and ends that build up around a job like this. It's typical of what we see from homes with water or pest damaged furniture.
Working in Gold Coast
Gold Coast is a city of beachside towers, canal homes, family suburbs and hinterland acreage. We run trucks across the whole Gold Coast every day, from Coolangatta to Coomera and out to the hinterland, so wherever you are there is usually a crew nearby. We bring the right truck for the street, from tight unit driveways to wide acreage tracks.
The initial assessment
I arrived at the property and the first thing I noticed was the access. Before I look at the pile, I walk the route it has to travel: doorways, steps, the driveway slope, overhead wires, where the truck can park. For this job I paced it out and worked out we'd need about two-thirds of the tipper.
How the job was planned
I gave them a fixed price there and then, based on volume, and explained what was included: removal of broken and unsellable furniture, dismantling on site and timber and metal separation. They said yes on the spot, so we planned to load in one visit rather than two.
Preparation
We checked the weather, laid out the straps and blankets for anything worth saving, and agreed a hand signal for "stop" because the truck was right on the road.
Step 1
Step one was the bulky stuff. My offsider and I took the largest items out first, tilting them through the door frames rather than forcing them. With broken dining chairs, damp-affected drawers and cabinets and collapsed sofas and armchairs in the mix, there was no point clearing small things while the big ones were still blocking the way.
Step 2
Step two was the heavy lifting. Anything over about forty kilos went on the trolley or got a two-person lift with straps. No hero stuff. A strained back on the first job of the day ruins the week.
Step 3
Step three was the final check. I went back through every room and corner with the customer, picked up the small stuff the big items had hidden, and swept up.
Removal, sorting and loading
I'm fussy about the load. A well-packed truck means one trip instead of two, and that's the difference between a fair price and an inflated one. We netted the top before we drove off.
From the truck it went to a licensed transfer station, where recyclables were dropped off separately, and anything usable went to a local op shop before the tip run.
Challenges we ran into
There were still fittings and connections attached, and the floor around it was soft from years of slow leaks.
How we handled them
We disconnected what was safe to disconnect, capped what wasn't ours to touch, and laid boards to spread the weight on the way out.
Completion and final result
When the last load was strapped down, the space was empty and swept. The customer walked through with me, signed off, and paid the price we'd agreed at the start, not a dollar more.
What I learned
What stuck with me was how much of it could be reused. People expect old Furniture Removal to mean everything goes to landfill. On this job, close to a third of it went somewhere useful.