Written by Chris Smith · Illustrative
The situation
I’m Chris Smith, owner of Clear Out. This is an illustrative example, not a real customer account. It follows how I’d approach a late Tuesday afternoon apartment cleanout for Nicole in Labrador, with a lift and basement storage cage.
Why they needed help
In this scenario, Nicole needs the unit emptied before a final clean. She can manage her personal belongings, but a lounge, mattresses and bulky furniture need two people. Leaving them beside the building’s bins isn’t an option.
What was at the property
The load includes a two-seat lounge, bed frame, chest of drawers, two mattresses, balcony chairs and potted plants. There are kitchen boxes, a microwave, a small fridge, bagged rubbish and storage cage contents partly covered by a tarp.
The initial assessment
I’d walk through with Nicole, confirming what stays and checking the lift, doorways and route to the truck. I’d inspect the cage too. Anything under that tarp needs uncovering before I can properly judge the volume and quote.
Planning the job
I’d confirm building access and lift arrangements rather than assume we can use a loading area. Our own two-person crew and tipper truck would handle the job, with no subcontractors. The truck would stay outside if basement clearance was unsuitable.
Preparation
Before shifting anything, I’d protect tight corners with moving blankets and keep the corridor clear. We’d bring a furniture trolley, flat dolly, straps and hand tools. Nicole would check drawers for documents, keys and anything she wants kept.
Step 1
I’d start with loose kitchen items and bagged rubbish to open up working space. Sharp or broken pieces need a rigid container, not a thin bag. We’d check for chemicals, liquid paint and gas bottles, which Clear Out cannot take, along with asbestos.
Step 2
Next, we’d undo the bed frame and bag its fixings. Drawers would come out before moving the chest, then be secured for transport. We’d carry mattresses without dragging them through shared areas and take the lounge through with one person guiding each end.
Step 3
On the balcony, I’d check pots for water and loose soil before moving them upright in tubs. Chairs would stack where possible. The fridge would need to be empty, defrosted and dry; we’d secure its door and strap it upright to the appliance trolley.
The removal
One of us would guide each bulky item while the other controlled the trolley. We’d make manageable lift trips, keeping doors and exits clear. Nothing would sit unattended in the foyer, and we’d avoid forcing furniture around corners.
Sorting and loading
In the tipper, heavy pieces would sit low and be restrained against movement. Reusable furniture would stay protected from dirty bags and soil.
Challenges
Tuesday’s school pick-up traffic could slow the approach to Labrador and push a late start closer to the building’s access cut-off. Lifting the cage tarp would reveal extra items: another dismantled shelf, two dining chairs and several bags.
How we handled them
I’d call Nicole about the traffic delay and confirm there was still enough access time. The hidden extras would go into the on-site truck-volume quote before loading. If anything else appeared later, I’d stop and agree any price change before taking it.
Completion
After the last cage trip, I’d walk through the unit, balcony and cage with Nicole to check we’d removed only the agreed items. We’d collect packing scraps, check the shared route and secure the load before moving the truck.
The result
The intended result is a cleared unit ready for its cleaner, not rubbish shifted into common areas. Suitable reusable goods would go to charity, recyclables to licensed facilities and the remaining waste to landfill, with unloading planned around those streams.
Lessons learned
My takeaway from this example is simple: uncover storage piles early and allow for school traffic when booking an afternoon unit job. Clear access, an agreed inventory and a quote before loading matter more than trying to rush the last few trips.