Written by Chris Smith · Illustrative
The situation
I'm Chris Smith, and this is an illustrative job, not a real customer account. Picture an early Saturday morning in Robina: Raj needs old appliances cleared from his garage and covered side area before he can use the space again.
Why they needed help
Raj can move the small bits, but the fridge and washing machine need more than a pair of willing hands. I'd bring our own two-person crew and tipper truck, not subcontractors, with appliance trolleys, straps and blankets.
What was at the property
The load includes a fridge, chest freezer, washer, dryer, dishwasher, removed oven and cooktop. There are also a microwave, boxed benchtop appliances, a portable heater and a disconnected split-system air conditioner.
The initial assessment
I'd walk through with Raj before touching anything, checking access, loose parts and what stays. I'd assess the truck space required and quote by volume on site. Loading would only start once Raj accepted that price.
Planning the job
The side gate is locked and Raj has no key. I wouldn't force it or lift a freezer over the fence. We'd check the longer route through the laundry and garage, measuring the narrowest doorway against each large appliance.
Preparation
I'd ask Raj to clear the route and keep everyone away from the loading area. We'd protect the laundry floor and doorway, set the truck on firm, level ground, then check the trolley straps and load-rated ramp before moving.
Step 1
First I'd confirm everything is ready for collection. The fridge and freezer must be empty and defrosted. We'd check the washer hoses are drained, and confirm a qualified tradesperson has disconnected the hardwired and refrigerant equipment.
Step 2
Next we'd remove loose fridge shelves, oven trays and the microwave's glass plate, wrapping them separately. I'd secure doors and lids, coil leads clear of the wheels and bag the washer hoses so they couldn't drip along the access route.
Step 3
The boxes under the side awning are water-damaged. One base starts giving way as we check it, so we'd stop handling them by the cardboard. I'd transfer the small appliances into rigid tubs, checking for loose glass and sharp edges.
The removal
We'd move the biggest units first while the route is clear. I'd strap each one to the appliance trolley, with my crewmate guiding at corners. At the laundry threshold we'd pause, check wheel clearance and cross without dragging.
Sorting and loading
On the truck, I'd position the heavy appliances low and spread their weight across the tray. The fridge would stay upright, with blankets between units and straps to rated anchors. Smaller items would sit secured in tubs, not loose on top.
Challenges
The gate adds distance and two tight turns to every trip. The soggy cartons create a different risk: their contents can drop without warning. Neither problem calls for rushing, especially with a heavy washer coming through a laundry doorway.
How we handled them
I'd separate the tasks: repack the small gear first, then keep the passage clear for trolley runs. We'd leave the locked gate untouched. If a unit couldn't safely fit the alternate route, it would stay until proper access was arranged.
Completion
Before leaving, I'd walk both storage areas with Raj, collect the torn cardboard and check for stray screws. We'd inspect the floor and doorway, then recheck the load restraints. Asbestos, chemicals, liquid paint and gas bottles cannot go with us.
The result
In this example, Raj gets the garage and side area back. Suitable reusable goods go to charity; recyclable appliances go to licensed facilities. Refrigerant units need appropriate processing. Only the remaining non-recoverable material goes to landfill.
Lessons learned
My takeaway from this scenario is to check access before shifting weight and never trust wet packaging. With over 10 years' experience, I'd rather spend extra minutes measuring a doorway than risk damage trying to squeeze an appliance through.