Written by Chris Smith · Illustrative
The situation
I'm Chris Smith, owner of Clear Out. This illustrative example follows a late Saturday afternoon collection in Robina for a homeowner I'll call Noah. It shows how I'd handle the job, rather than describing an actual customer booking.
Why they needed help
In this scenario, Noah's kitchen and bathroom had been stripped, leaving the garage full and the side path narrow. I'd be collecting the renovation waste, not disconnecting plumbing or doing demolition. He needed access cleared before work resumed.
What was at the property
I'd find cabinets, benchtop sections, a bath, shower tray and screen, vanity, basin and toilet. Buckets of broken wall and floor tiles sat beside splashbacks, mirrors, an old oven, rangehood and loose tapware. Some cabinet doors were still worth keeping.
The initial assessment
I'd walk through with Noah, check the carry route and confirm appliances and fixtures were disconnected. I'd also ask about suspect sheeting or backing material. We cannot take asbestos, chemicals, liquid paint or gas bottles, so those stay out of the load.
Planning the job
I'd estimate the truck volume and quote on site before loading anything. Heavy tiles need a payload check as well as space, so I wouldn't judge this pile by size alone. Our own two-person crew and tipper truck would handle the collection, with no subcontractors.
Preparation
I'd put on gloves, eye protection and safety boots, then lay floor protection along the indoor carry route. A trolley, buckets, straps and moving blankets would be ready. We'd check cabinet edges for screws and keep a clear walkway beside the waste.
Step 1
I'd start with loose doors and small fittings so we could reach the larger pieces without stepping over debris. Tapware would go into a separate container. We'd keep intact cabinets aside while checking which ones Noah wanted removed and which he might retain.
Step 2
Next, I'd tackle the bath, vanity carcass and benchtop sections with my crewmate. We'd use the trolley where the surface allowed and lift together at thresholds. Nothing would be dragged over tiles or forced through a doorway with exposed sharp edges.
Step 3
I'd carry the shower screen and mirrors separately, protecting their edges and securing them against movement. Broken ceramics and tiles would travel in manageable buckets. I'd avoid smashing bulky pieces just to make them easier to carry.
The removal
With neighbours' cars blocking the street approach, I'd stop and assess access before positioning the truck. We'd need a lawful parking spot and a safe carry route, not a squeeze between parked cars with a bath or a sheet of glass.
Sorting and loading
I'd spread contained tile and ceramic waste low in the tray, keeping weight balanced. Cabinets would sit securely with lighter pieces above. Appliances and metal fittings would stay grouped, while reusable goods would be protected from rubble and restrained.
Challenges
Partway through sorting, Noah would change his mind about two cabinet doors and the mirror, then decide the oven should go after all. I'd pause loading there. A changing keep pile can lead to mistakes, especially with fading light and awkward street access.
How we handled them
I'd ask Noah to mark a separate keep area and confirm each disputed item with me. Any volume change would mean confirming the quote again before proceeding. For access, I'd ask if a neighbour could move a car, without assuming they were available.
Completion
I'd sweep the carry route, pick up loose screws and walk through the cleared areas with Noah. Before leaving, we'd check the load restraints and cover. The retained doors and mirror would remain together, away from the next stage of building work.
The result
The intended result is a usable garage and side path, with Noah's keep items untouched. I'd direct suitable reusable goods to charity, recyclables to licensed facilities and the remainder to landfill. Saturday delivery would depend on receiving-site hours.
Lessons learned
My takeaway from this example is to settle the keep pile early and check street access before lifting begins. For a late Saturday job, I'd also confirm disposal hours in advance. Same-day collection is often possible, but I'd check availability first.