Written by Chris Smith · Illustrative
The situation
I'm Chris Smith, and this is an illustrative job, not an account of a real customer. Picture me arriving at Tom's place in Robina late on a Friday afternoon, with broken paving stacked beside the garage and rubble running along the side path.
Why they needed help
In this example, Tom had pulled up an old garden path and dismantled a low block edging. He had managed the demolition but couldn't shift the heavy leftovers. He wanted the driveway usable again without spending his weekend making loaded trailer trips.
What was at the property
I found broken slab and path pieces, old pavers and stepping stones, brick and block rubble, retaining wall blocks, and loose mortar and screed. Rock and gravel sat underneath. Some concrete pieces were small enough to carry; others needed two people.
The initial assessment
I checked the walking route, driveway surface and truck position before touching the pile. I also looked for suspect material mixed through it. We cannot take asbestos, chemicals, liquid paint or gas bottles, so anything uncertain would stay put for assessment.
Planning the job
I quoted on site by truck volume before loading, then explained the sequence to Tom. Dense rubble can reach the truck's weight limit well before it fills the body. I planned a shallow load, with a weighbridge check before taking any further material.
Preparation
Our own two-person crew brought our tipper truck, a rated rubble trolley, shovels, a broom and small tubs. We wore boots, gloves and eye protection. I laid protective boards across the vulnerable paving and kept the route clear of tools and loose stones.
Step 1
We started with accessible stepping stones and sound pavers, checking each for cracks and sharp edges. Suitable reusable pieces went aside while I checked charity acceptance. I wouldn't call a chipped, mortar-covered block reusable just to avoid a disposal pile.
Step 2
Next came the loose brick and small concrete pieces at the front. We used lightly filled tubs rather than one overloaded container. As we exposed the back of the stack, I spotted wasps moving around a nest tucked behind a retaining wall block.
Step 3
I stopped work around that stack and moved Tom away from it. We left the blocks untouched and isolated the area for a pest professional. The separate driveway pile remained accessible, so we continued there only after checking we were clear of the wasps.
The removal
We moved manageable pieces by trolley and used a coordinated two-person lift for awkward ones. Nobody stood beneath a raised load or tried to catch falling concrete. Oversized pieces stayed down until we could arrange suitable handling rather than force a lift.
Sorting and loading
Inside the tipper, I placed heavier pieces low and spread them across the floor, not against one side. We kept reusable pavers separate from the recycling load. Loose mortar, screed and gravel went into contained batches, with no rubble stacked above the sides.
Challenges
Then a trolley wheel failed while we were moving a small load over the boards. Combined with the nest and fading Friday light, that changed the plan. Finishing everything that afternoon was no longer sensible, even though much of the driveway pile was loaded.
How we handled them
We stopped, steadied and unloaded the trolley before taking it out of use. I didn't drag it across Tom's paving. I explained the remaining work and arranged a return with sound equipment, after professional nest treatment and advice that the area was safe.
Completion
On returning, we cleared the back stack and shovelled up the remaining gravel. Accepted reusable goods went to charity; separated masonry went to a licensed recycling facility. Non-recoverable residue went to landfill. Each departing load was covered and secured.
The result
In this scenario, Tom got his driveway and side path back in two visits rather than one rushed afternoon. I finished with a sweep and a walk-through, checking for sharp fragments along the edges and showing him exactly which areas we had cleared.
Lessons learned
My takeaway is to inspect behind stacks where safely visible, check trolley wheels before loading and leave room for a changed plan. Over 10 years in removal work has taught me that heavy rubble rewards steady handling, not squeezing in one last load.