Written by Chris Smith · Illustrative
The situation
I'm Chris Smith from Clear Out. This illustrative example follows a Thursday late-afternoon general waste removal in Robina for a fictional customer, Steve. It shows how I'd approach the work, rather than describing a real booking.
Why they needed help
In this scenario, Steve had gathered household clutter beside his garage but couldn't shift it in his car. He wanted the space back before the weekend. Loose rubbish was mixed with bulky pieces, and part of the pile sat beyond the pool fence.
What was at the property
The collection included tied rubbish bags, a small bedside cabinet, homewares, toys, cardboard, plastic packaging and garden bags. There was also a broken vacuum and an old washing machine, described beforehand as fairly light and easy to move.
The initial assessment
I'd start by walking through with Steve, confirming what stayed and what went. I'd check the bags for excluded materials and explain that we can't take asbestos, chemicals, liquid paint or gas bottles. Then I'd quote by truck volume before loading.
Planning the job
The truck would sit on the driveway, leaving the footpath clear. I'd measure the pool gate and check the narrow turn beside it. Our own two-person crew would do the lifting into our own tipper truck, with no subcontractors brought in.
Preparation
Before starting, I'd clear loose toys from the carrying route and lay protective boards across the vulnerable edge of the paving. We'd have gloves, a broom, a shovel, tubs, ratchet straps and an appliance trolley ready beside the truck.
Step 1
We'd remove the accessible rubbish bags first, checking for splits before lifting. A leaking or torn bag would go inside another bag rather than being dragged. This would open enough working room to reach the furniture without stepping over loose waste.
Step 2
Next, I'd separate clean homewares and complete toys from broken pieces. The cabinet would be checked for sound joints and usable drawers. Suitable goods would be set aside for charity, with small items in tubs so they didn't get crushed.
Step 3
We'd flatten the cardboard and keep it dry, then separate plastics accepted by the receiving facility. Garden bags would be checked for soil, rubble or household rubbish before being grouped together. I'd avoid mixing those materials back into the general load.
The removal
With the small items cleared, we'd move the cabinet through the gate, one person guiding each end. The broken vacuum could follow in a tub. I'd leave the washing machine until we had a clear route and had checked its weight and handling points.
Sorting and loading
I'd keep dense items low and spread their weight across the truck bed. The cabinet would be padded and strapped separately from rubbish. Cardboard would sit in a contained section, with bagged waste restrained so nothing could shift or blow out.
Challenges
The pool fence would rule out a straight carry from the rear pile to the truck. The washing machine would also prove much heavier than Steve expected. That changes the lifting plan, even though the appliance takes up the same amount of truck space.
How we handled them
I'd keep the pool barrier intact and close the gate between trips. After confirming the machine was disconnected and drained, we'd strap it to a rated trolley. One person would control it while the other guided it through the measured opening and up rated loading ramps.
Completion
Once loaded, we'd sweep the work area and collect scraps caught along the fence. I'd walk Steve through the cleared spaces, check that nothing marked to stay had been taken, and inspect the load restraints and cover before leaving the driveway.
The result
In this example, Steve gets his garage access back without dismantling the pool fence. Usable goods go to charity, accepted recyclables and appliances to licensed facilities, and residual rubbish to landfill. I'd check receiving hours before setting the disposal run.
Lessons learned
After more than 10 years in this work, I still check access and weight on site. A photo of the pool gate and the appliance model would help me plan this job beforehand. Late-afternoon work needs a clear sequence, not rushed lifting as daylight runs out.