Written by Chris Smith · Illustrative
The situation
I’m Chris Smith. This illustrative example follows a green waste collection at Grace’s Robina townhouse late on a Tuesday afternoon. It shows how I’d organise the work, rather than describing an actual customer booking.
Why they needed help
In this scenario, Grace had cut back an overgrown courtyard but couldn’t get the pile through to her car. Loose weeds were spilling onto the path, and long palm fronds made bagging everything impractical. She needed the garden access cleared.
What was at the property
The pile held lawn clippings and prunings, palm fronds, hedge trimmings, leaf litter, small branches, weeds and undergrowth. I’d check beneath the leafy top layer too: loose soil, plastic pots and garden ties need different handling from clean vegetation.
The initial assessment
I’d walk from the courtyard to the truck before quoting, checking the narrow side passage, gate latch and overhead clearance. Then I’d quote by the truck volume the material would occupy, explaining the price to Grace before we loaded anything.
Planning the job
For this example, the body corporate permits loading only until 5 pm. At a 4 pm assessment, I’d check that our two-person crew could finish within that window. If the pile or carry looked too slow, I’d arrange another permitted time instead.
Preparation
I’d position our own tipper truck in the approved loading space without blocking garage access. Our crew would bring gloves, eye protection, rakes, a broom, tubs, a tarp and hand loppers. Grace would move her pot plants away from the gate.
Step 1
I’d start with the long palm fronds lying across the pile. We’d lift them clear rather than pull them through the clippings, then trim awkward stems with loppers. Manageable bundles would travel lengthways through the passage, with cut ends controlled.
Step 2
Next I’d separate the small branches from the softer hedge trimmings. Forked pieces would be shortened where needed so they couldn’t catch the fence. One person would prepare each load while the other carried it, keeping the gate area clear.
Step 3
I’d rake the clippings, leaf litter and weeds into tubs rather than drag a loose heap along the path. Small tarp loads would suit the lighter undergrowth. Neither carrier would be filled so high that we couldn’t see our footing or hold it securely.
The removal
Our own crew would handle the carry and loading, with no subcontractors. I’d keep checking the shared driveway between trips and pause for residents passing through. Tools would stay inside the courtyard, not scattered beside the truck or across the walkway.
Sorting and loading
In the tipper, I’d lay the branches and fronds flat, distributing them across the tray. Softer material would fill the gaps instead of forming a tall, unstable mound. Any plastic ties or pots found in the pile would be kept out of the green waste load.
Challenges
The side passage would rule out carrying broad bundles shoulder to shoulder. The loading deadline would also leave little room for discovering extra waste halfway through. Those two constraints matter more here than simply getting the truck close to the gate.
How we handled them
I’d use smaller loads and a clear call before entering the passage so we weren’t meeting halfway. I’d also agree the full pile with Grace at the start and monitor the time. Extra pruning during collection would need a fresh check, not an automatic yes.
Completion
Once the pile was gone, I’d rake the remaining scraps and sweep the paved carry route. Grace and I would check the courtyard and gate together. Before leaving within the loading window, we’d secure the truck’s load cover and check for loose material.
The result
The intended result is a usable courtyard and a clear shared access route. I’d take the separated green waste to a licensed facility that accepts it for recycling. Any stray non-recyclable rubbish would be kept separate for landfill, not mixed into that stream.
Lessons learned
After more than 10 years in this work, I’d still measure the access against the material, not just the truck space. For a job like Grace’s, confirming the loading cutoff early and reducing bulky fronds at the pile would make the biggest practical difference.