Written by Chris Smith · Illustrative
The situation
I'm Chris Smith, owner of Clear Out. This is an illustrative job, not a real customer account. In this example, I arrive at Chloe's Robina home mid-morning on a Saturday to assess an old outdoor spa beside a small timber deck.
Why they needed help
Chloe wants the space cleared before repairing the courtyard. The spa is too wide for the side gate in one piece, and its cabinet is falling apart. Dragging it out would risk scraping the house and damaging the narrow paved access.
What was at the property
The pile includes an acrylic spa shell, timber framing, composite cabinet panels, a heavy cover, pumps and a heater. Loose decking sections sit alongside old pool equipment, PVC plumbing and fittings. Only the detached decking is included.
The initial assessment
I check the shell, gate width, paving and truck position before quoting by truck volume. Chloe agrees to the price before loading starts. I also confirm that a licensed electrician has disconnected the spa and that it has already been drained.
Planning the job
Our own two-person crew will dismantle the spa and carry manageable sections to our tipper truck, with no subcontractors.
Preparation
We lay protective sheets along the tight section beside the house and keep the gate secured open. Gloves, boots, eye protection and suitable respiratory protection are ready. I check for residual water before we start undoing any plumbing.
Step 1
We remove the cover and unscrew accessible cabinet panels rather than ripping them off. Exposed screws go straight into a container. With the sides open, we can see the frame and check for hidden cables, pipes and trapped water.
Step 2
Next, we unbolt the disconnected pumps and heater, catching residual water in a shallow tray. We separate short pipe runs and cap sharp ends for carrying. The equipment goes onto a trolley instead of being hauled by its cables or fittings.
Step 3
With the equipment removed, we support the shell and mark cuts that will fit through the gate. Using a reciprocating saw with a suitable blade, we cut controlled sections, manage dust and stop regularly to collect fragments from the ground.
The removal
One of us guides each shell section through the narrow passage while the other carries from the rear. We use two-person lifts for awkward pieces and the trolley on level paving. Nothing is thrown over the fence or dragged against the render.
Sorting and loading
We nest shell sections low in the truck body, with cabinet panels flat beside them. We restrain the load and check that no sharp edges can escape during transport.
Challenges
Two details change the plan: a wasp nest behind the stack of loose decking, and school pick-up traffic expected nearby. For this Saturday example, that traffic comes from a school sports event finishing late in the morning, not a normal school day.
How we handled them
We stop work near the nest, keep Chloe clear and leave that stack untouched for pest treatment before a return visit. We continue only in the separate safe work area. For the traffic, we use an alternative departure route and avoid the school frontage.
Completion
Before leaving, we sweep up shell fragments, screws and loose fittings, then walk the cleared spa footprint with Chloe. I point out the decking still awaiting removal. That part of the job stays open until the nest has been professionally dealt with.
The result
The spa is gone, but we don't call the whole job finished. After treatment and a safe return visit, the decking can follow. Reusable goods go to charity, accepted recyclables to licensed facilities, and damaged mixed materials that cannot be recovered go to landfill.
Lessons learned
My takeaway from this example is to check behind stacks before shifting them and ask about local events, even on weekends. Safe access, confirmed electrical disconnection and an agreed loading plan matter more than trying to finish everything in one visit.