Written by Chris Smith · Illustrative
The situation
I'm Chris Smith, and this is an illustrative job, not an account of a real customer. In this example, I arrive at Luke's Robina townhouse early on a Saturday to assess old backyard play equipment before our two-person crew starts work.
Why they needed help
Luke wants the yard cleared because the children have outgrown the equipment. The trampoline has split padding, and rust has weakened the swing frame. I would treat both as dismantling jobs rather than try to carry them out assembled.
What was at the property
I find a trampoline and safety net, a swing set with a plastic slide, a small timber cubby and a portable basketball stand. There is also an empty sandpit frame and a loose shade sail. Flaking metal beneath the swings needs careful handling.
The initial assessment
I measure the side gate and check the route to the driveway for steps, tight corners and loose pavers. Then I estimate the dismantled load's truck volume and give Luke an on-site quote. Nothing gets loaded until he accepts the price.
Planning the job
For this example, the body corporate permits loading from 8 am, but a ute is parked across the driveway. I ask Luke to arrange its removal and confirm the loading rule. Until the permitted time, I keep the visit to a quiet assessment.
Preparation
Once access is clear and the permitted work time begins, I put on gloves, boots and eye protection. My crew mate and I lay out sockets, spanners, a drill driver, spring tool, straps and a trolley. We keep children and pets out of the yard.
Step 1
I take down the trampoline net and poles first, then remove the damaged padding. Using the spring tool, I release springs progressively around the mat so tension comes off evenly. We separate the frame sections and collect every spring in a tub.
Step 2
At the swing set, my crew mate supports the top rail while I undo the braces and legs. We remove the swings and slide separately. A seized bolt gets penetrating oil and a hand-tool attempt before I consider cutting it with the frame supported.
Step 3
We strip the cubby roof and wall panels in small sections, supporting each before removing its fixings. I pull exposed nails or hammer them flat. The basketball pole comes down under control, and we lift the sandpit boards after checking for anchors.
The removal
I carry short frame sections through the gate while my crew mate handles the trolley. We take long rails together to avoid clipping the fence. The folded shade sail and bundled netting travel separately, with loose bolts kept off the shared path.
Sorting and loading
In our own tipper truck, I put heavy metal sections low and forward, keeping weight balanced. Timber panels lie flat, with sharp edges contained. I strap awkward pieces and keep reusable items apart from waste so unloading does not damage them.
Challenges
The ute and loading restriction affect the whole sequence, not just our arrival. Starting dismantling too soon could leave a pile blocking Luke's yard with nowhere to load it. Rusted joints also mean I cannot assume every section will unbolt neatly.
How we handled them
I wait until Luke has the ute moved and we can position the truck without obstructing neighbours. Our own two-person crew does the work, with no subcontractors. We dismantle one item at a time, preserving a clear carrying route throughout.
Completion
I sweep the hard surfaces and check the grass for screws, springs and splinters. Luke walks through the yard with me before departure. I also check the shared driveway, close the truck's tailgate and inspect the load restraints before driving away.
The result
In this example, the sound slide goes to charity after acceptance is confirmed. Separated steel goes to a licensed recycling facility. Rotten timber, torn netting and other material unsuitable for reuse or accepted recycling go to landfill.
Lessons learned
For me, the useful lesson is to confirm shared-property access before bringing tools out. A clear driveway and agreed loading time make the sequence workable. If you have a similar Gold Coast job, call Clear Out on 0444 526 245 to discuss access.