TV & Electronics Removal case study

A Thursday TV and Electronics Clear-Out in Robina, with Rain and a Wasp Nest

Written by Chris Smith · Illustrative

The situation

I'm Chris Smith. This is an illustrative job, not a real customer account. Picture me arriving at Hayley's Robina home mid-morning on a Thursday to clear old TVs and electronics from a garage, with dark clouds building overhead.

Why they needed help

In this example, Hayley wanted the garage floor back, but the old sets were too bulky for her car. A heavy CRT sat beneath loose cables, while a rear-projection TV blocked access to a cabinet. Pulling things out alone risked a toppled stack.

What was at the property

I found two flat screen TVs, the CRT and rear-projection set, three computer monitors, a projector and its rolled screen. There were also two media cabinets, a tub of remotes and tangled leads. Nothing was connected to power.

The initial assessment

Before touching the stack, I checked the doorway, driveway slope and lifting space with my crew mate. I estimated the truck volume and gave Hayley the price before loading. We confirmed what was leaving and what had to stay.

Planning the job

My plan was to clear loose gear first, then move cabinets to open a path for the heavier sets. Our own two-person crew and tipper truck would handle the work, without subcontractors. I parked close enough to keep the carry short.

Preparation

We brought out gloves, enclosed footwear, moving blankets, straps and a padded trolley. I asked Hayley to keep children and pets inside. We cleared the route to the truck and set aside a dry spot for sorting small electronics.

Step 1

I gathered cables and remotes into a lidded crate, keeping any matching leads with their devices. The projector went into a padded box and the screen stayed rolled. We removed loose cabinet shelves so they could not slide out on the carry.

Step 2

As we opened a gap beside the first cabinet, I spotted wasps moving around a nest behind the stack. I stopped work in that corner. We backed away without shifting the cabinet further, spraying the nest or trying to knock it down.

Step 3

I explained that the blocked corner needed a pest professional before we could finish it. With Hayley's agreement, we continued only with items already clear of that area. We left the nest and anything close to it completely alone.

The removal

For the accessible flat screens, we protected the panels with blankets and carried them upright, without gripping the screens. The CRT needed both of us to position it on the trolley. We secured it before crossing the garage threshold.

Sorting and loading

On the truck, the CRT sat low, padded and strapped against movement. Flat screens stood protected in a separate space, with no weight against their panels. I secured the small-parts crate so it could not bounce into the screens in transit.

Challenges

Halfway through the safe portion, the storm arrived and rain started blowing across the driveway. Wet ground changed the footing, and gusts made carrying the screen awkward. The wasp nest also meant the original loading sequence was no longer workable.

How we handled them

We paused carries, covered the truck load and sheltered inside, away from the nest. Once the storm passed, I checked the route before restarting. Hayley would arrange pest treatment; the remaining items stayed put until the area was confirmed safe.

Completion

In this scenario, we return after pest clearance to collect the rear-projection set and cabinets. I confirm the remaining scope and volume-based quote before loading. Cabinets travel low and restrained, with the bulky TV padded and secured separately.

The result

Reusable cabinets go to charity if accepted, and the electronics go to a licensed recycling facility. Anything unsuitable for reuse or recycling goes to landfill. We unload the electronics carefully rather than tipping fragile screens out of the truck.

Lessons learned

My final check with Hayley covers the cleared floor and any loose scraps left behind. The lesson here is to inspect before shifting a stack and change the plan when conditions change. A storm or active nest is a reason to stop, not rush a lift.

More case studies

Customer Anecdotes →

Got a job like this?

Call 0444 526 245 for a quote.