Written by Chris Smith · Illustrative
The situation
I'm Chris Smith, and this is an illustrative job, not a real customer account. In this example, I arrive at Kylie's Mermaid Waters home late on a Thursday afternoon to remove old laundry gear before new appliances arrive.
Why they needed help
Kylie has shifted the loose bits but left the heavy lifting to us. The front loader is awkward to grip, and the route to the driveway runs beside a pool fence. Her nervous dog also needs somewhere quiet while we work.
What was at the property
I find a disconnected front load washer, a vented dryer and an older top loader under the patio. There's also a loose laundry cabinet, a removed tub, dryer wall brackets and a bundle of hoses. The plumbing is already capped.
The initial assessment
I check the machines for trapped water, sharp edges and loose parts, then measure the narrow passage and pool gate. Before we load anything, I quote the space this lot will occupy in our tipper truck and get Kylie's approval.
Planning the job
My two-person crew handles the carry with our own truck, not subcontractors. I plan to take the washer first while the route is clear. The dryer follows, then the patio machine and loose pieces, with nothing staged against the pool fence.
Preparation
I ask Kylie to settle the dog inside behind a closed door before we open the side gate. We lay floor protection through the laundry and bring in an appliance trolley, ratchet straps, blankets and a shallow tray for residual water.
Step 1
With the washer unplugged and isolated from the water supply, I lower its loose drain hose into the tray. We empty what remains, secure the hoses to the rear and tape a small bag of fittings to the machine so nothing drops underfoot.
Step 2
We slide the trolley plate under the washer and strap it firmly to the frame. One of us controls the handles while the other guides the base over the laundry threshold. We pause on level ground to check the strap before turning.
Step 3
At the pool gate, we square the trolley to the opening rather than trying to swing through sideways. I guide the clearance past the latch while my crew mate rolls forward slowly. Once we're through, the gate closes and latches behind us.
The removal
We carry the lighter dryer together, keeping its door shut and the cord bundled. The top loader goes out on the trolley next. I check the detached tub for sharp flanges, then wrap those edges before carrying it away from the house.
Sorting and loading
Using secured, load-rated ramps, we load the washers low and forward on the truck, spread across the tray and strapped to anchor points. The dryer sits separately on a blanket. We secure the cabinet and contain the brackets and hoses.
Challenges
The pool fence leaves little room to correct a crooked approach with a heavy washer. Truck noise also sets the dog barking indoors. Late afternoon light is fading along the side passage, making the threshold and gate latch harder to judge.
How we handled them
I stop between loads so Kylie can check the dog without opening its room onto our route. We use a portable work light at the gate and keep clear verbal signals. We don't remove fence panels or leave the pool gate propped open.
Completion
I sweep up grit from beneath the machines and check the passage for screws and scraps of tape. Kylie and I walk through the empty laundry, confirm only the agreed items have gone, then check that the pool gate still self-closes and latches.
The result
In this example, the clean, usable cabinet goes to charity after acceptance is confirmed. Non-recyclable hose offcuts and damaged scraps go to landfill.
Lessons learned
My takeaway from this scenario is to check the exit before moving the first machine. A measured gate, drained hoses and a separate room for the dog make the work more controlled. For a similar Gold Coast removal, call Clear Out on 0444 526 245.