Written by Chris Smith · Illustrative
The situation
I’m Chris Smith, owner of Clear Out. This illustrative example follows a weekend rubbish removal in Southport, not a real customer job. It starts with Glen calling late on a Wednesday afternoon to arrange a Saturday clean-out.
Why they needed help
Glen’s unit and basement storage cage held the leftovers from a tidy-up and some small renovations. He could be there on Saturday, but the building’s goods lift was available for just one hour. That made the order of work important.
What was at the property
The load included a mattress, a dismantled bed, a small chest of drawers, household rubbish and boxed garage clutter. There were also bagged balcony prunings, short timber offcuts and a few bags of broken tiles from the renovation.
The initial assessment
On Saturday I would inspect the pile with Glen before moving anything. I’d check sharp edges, bag weights and access, then quote by the truck volume required. Loading would only start once Glen had agreed to that on-site price.
Planning the job
I’d put the upstairs furniture first because it depended on the lift. The storage cage could wait: it had a separate route to the loading area. Our own two-person crew and tipper truck would handle the job, without subcontractors.
Preparation
Before the booked hour began, we’d check the approved truck position and walk the route. I’d set out a furniture trolley, blankets, straps, gloves and a broom, then confirm with Glen which loose items were staying in the unit.
Step 1
We’d strip loose bedding from the mattress and secure the bed slats into a manageable bundle. My crewmate and I would carry the mattress together, watching the door closers and corners rather than dragging it along the corridor.
Step 2
Next I’d check the drawers were empty and secure them for the trolley trip. We’d use the building’s approved lift protection, keep within its load limit and move one controlled load at a time. Nothing would be left across an exit.
Step 3
With the upstairs pieces down, I’d check the lift and corridor for scraps and return the lift within the booking. Then we’d collect Glen’s garage clean-up load, keeping the heavy tile rubble in small containers we could lift safely.
The removal
At the truck, we’d place the sound drawers on a blanket and strap them against movement. The mattress would be secured separately. Dense rubble would sit low and spread across the tray, not piled at the rear or on top of furniture.
Sorting and loading
Small loose items would go into contained loads. We’d leave access to each group so unloading at the right destination did not mean emptying everything.
Challenges
In this scenario, a storm rolls in halfway through the upstairs runs. Wind catches loose packaging near the loading bay and rain starts reaching the exposed path. The lift clock is still running, but that does not justify a risky carry.
How we handled them
I’d stop exposed carries, contain the loose packaging and cover the truck load from ground level. We’d contact building management about the lift window. If lightning or slippery footing made work unsafe, we’d pause and arrange fresh access.
Completion
For this example, the squall eases soon enough to finish the lift runs safely within the hour. After collecting the basement items, we’d sweep the loading area, check it with Glen and secure the whole load before leaving.
The result
The reusable drawers would go to charity, subject to acceptance. Separated recyclables would go to licensed facilities, with remaining non-recoverable rubbish going to landfill. Glen would have his storage space back and no furniture awaiting another lift booking.
Lessons learned
My takeaway is to book access before promising a finish time and leave room for weather delays. I’d also ask about excluded materials early: Clear Out cannot take asbestos, chemicals, liquid paint or gas bottles. Those need separate arrangements.