Written by Chris Smith · Illustrative
The situation
I'm Chris Smith, and this is an illustrative job, not a real customer account. Picture me arriving at a Mermaid Waters townhouse mid-morning on a Monday. In this example, Steve needs old whitegoods removed before replacement appliances arrive.
Why they needed help
Steve has the appliances downstairs, but getting them to the truck is another matter. The driveway drops sharply towards the street, and his body corporate allows loading only between 10 am and noon. Carrying a fridge downhill by hand isn't a sensible option.
What was at the property
The collection includes a tall fridge, a chest freezer, a front-load washing machine, a vented dryer and a dishwasher. The fridge no longer cools, while the dryer still works. The freezer is empty and defrosted, with the other units already disconnected.
The initial assessment
I check the appliance sizes, door clearance and driveway surface before quoting. Our price is based on the truck space the load will occupy, agreed on site before loading begins. I also check for loose shelves, trapped water and damaged appliance casings.
Planning the job
I plan the run around the approved loading window, not just our arrival time. Our own two-person crew and tipper truck handle the job, with no subcontractors. The fridge and washer need the clearest path, so I put those first in the removal sequence.
Preparation
I ask Steve to confirm the body corporate's loading conditions and clear the shared access. We lay floor protection inside, secure cords and drain residual water from the washer hose into a tray. Any appliance still hardwired would stay put for an electrician.
Step 1
We remove the fridge's glass shelves and pack them separately, then secure its doors with a strap. I check the appliance trolley's capacity and fasten the fridge to it. My offsider watches the doorway while I ease the trolley across the protected threshold.
Step 2
The steep section needs a pause and a proper footing check. We keep the load under control together, with nobody standing downhill in its fall path. If the slope defeats safe trolley handling, we stop rather than try to catch a runaway appliance.
Step 3
At the truck, we use rated loading ramps on firm, level ground, secured against slipping. I check the approach before moving each unit up. The truck stays parked with its brake applied and wheels chocked; the tipper body remains down throughout loading.
The removal
The washer follows the fridge, strapped low on the trolley because of its weight. We keep its hoses bundled clear of the wheels. Next come the freezer, dishwasher and dryer, one at a time, with an offsider checking the route stays clear of residents.
Sorting and loading
I place the heavier units low and spread their weight across the truck bed, within its load limits. Each appliance gets restrained to suitable anchor points. Blankets separate painted surfaces, and the reusable dryer stays apart from the damaged fridge.
Challenges
The awkward part is the combination of gradient and clock. A steep driveway slows every trip, while the body corporate's window leaves no room for casual delays. Shared access also means we can't leave an appliance sitting across the driveway between runs.
How we handled them
I keep the preparation separate from truck loading, so the route and appliances are ready first. We check the time between trips without rushing a heavy lift. If safe loading cannot finish by noon, I arrange another approved window rather than ignore the rule.
Completion
Before leaving, I walk the route with Steve, checking for water, packaging and marks. We collect the floor protection and sweep the loading spot. At the truck, I recheck every restraint and make sure no hose, cord or loose shelf can shift in transit.
The result
In this example, the appliances are out before noon. The working dryer goes to charity if accepted. The failed cooling units go to a licensed facility equipped to handle refrigerants; other recyclables go to licensed facilities, with residual waste to landfill.
Lessons learned
After more than 10 years in this work, I know access details matter as much as the appliance list. Tell me about slopes and loading rules when booking. For whitegoods removal on the Gold Coast, call Clear Out on 0444 526 245 and describe what's coming out.