Junk Hauling case study

Illustrative Junk Hauling Job: A Tight Street and Heavy Backyard Waste in Labrador

Written by Chris Smith · Illustrative

The situation

I'm Chris Smith, owner of Clear Out. This is an illustrative job, not a real customer account. Picture me arriving at Kylie's Labrador property late on a Thursday afternoon, with our own two-person crew and tipper truck.

Why they needed help

In this example, Kylie had cleared a shed and pulled down an old fence. The leftovers filled the side yard. I could see why she needed a hand: several pieces needed two people, and a car boot wasn't much use for long timber or bulky furniture.

What was at the property

I walked past fence rails, loose palings, steel brackets and greasy machinery parts. There was also a sagging lounge, two pallets, wooden crates and a heap of branches. Broken pavers and bagged scraps made up the mixed heavy waste.

The initial assessment

I checked the access, tested awkward items for manageable weight and asked Kylie to point out everything going. Before loading, I quoted by the truck space required. I also checked for asbestos, chemicals, liquid paint and gas bottles, which we cannot take.

Planning the job

Neighbours' cars narrowed the street, so I ruled out stopping alongside them. I planned to use the driveway once Kylie moved her car. From there, we had a short carry down the side path without taking loads through the house.

Preparation

We put on gloves, safety boots and eye protection, then set out a trolley, straps, shovel and broom. I cleared loose scraps off the carrying route and checked the gate opening. Kylie kept her dog indoors while we worked.

Step 1

I started with a clear separation between rubbish and belongings. Kylie wanted one crate and a few straight fence rails kept, so we moved those onto the veranda. Nothing in that area would be touched without another check with her.

Step 2

We gathered loose steel into a sturdy container rather than carrying sharp handfuls. Manageable machinery parts went on the trolley, secured for the trip along the path. Anything too heavy for a controlled lift would need another plan, not a bigger heave.

Step 3

Next came the long timber. We carried it in pairs, keeping projecting nails away from our legs and the fence. I stacked rails lengthways in the truck body, below its sides, rather than leaving ends sticking out over the rear.

The removal

We took the lounge through the gate on its side after checking the clearance. I removed its loose cushions first so nothing dropped underfoot. Branches followed in small bundles, with the path kept open instead of buried under a second pile.

Sorting and loading

I kept dense material low and spread its weight across the tray, watching payload as well as volume. Steel stayed separate from green waste. Sound crates were protected from dirty scraps, while the lounge sat securely beside the timber.

Challenges

Partway through, Kylie decided she also wanted to keep a pallet already on the truck. Meanwhile, a neighbour needed to move a car near the driveway. With daylight fading, rushing either decision would have made a straightforward job risky.

How we handled them

I paused carrying while the neighbour drove out, then we safely retrieved the pallet before stacking anything over it. Kylie and I checked the keep pile again. I confirmed the revised load and any quote adjustment with her before continuing.

Completion

We shovelled the remaining small debris, swept the path and checked for nails. I walked the cleared area with Kylie before securing the load with straps and the truck cover. Her retained timber, crate and pallet stayed together on the veranda.

The result

In this example, the usable crates would go to charity, subject to acceptance. Steel, suitable timber and green waste would go to licensed recycling facilities; the ruined lounge and unrecyclable residue to landfill. I would keep those streams separate for unloading.

Lessons learned

After over 10 years doing this work, I still make time for a final keep-or-go check. This example shows why: access can change, and so can someone's mind. A clear holding area and a sensible loading order leave room to deal with both.

More case studies

Customer Anecdotes →

Got a job like this?

Call 0444 526 245 for a quote.